TechTip: Firmware 2.0 of the MF pro Flow Meter – Step-by-Step Guide

Read the step-by-step instructions for the latest firmware update 2.0 to learn all about the new features and operation of the MF pro flow meter.

The OTT MF pro is a user-friendly, low-maintenance electromagnetic flowmeter for cost-efficient flow and discharge measurement in open channels, sewers, and waste water areas. The automatic measurement and an immediately readable measurement result reduce the time required at the measuring point. The system consists of a compact and lightweight sensor and a robust control unit. Both system components are designed for mounting on conventional measuring rods and are ideally suited for very low flow velocities.

Learn all about the new features and operation of the MF pro in the step-by-step instructions for the latest firmware update 2.0. It deals with the following points:

  1. Site Selection
  2. Site Demarcation
  3. Instrument Assembly
  4. Meter Setup
  5. Measurement Setup
  6. Start Measurement – Basics
  7. Start Measurement – Edge Position
  8. Conduct Measurements at Stations
  9. End Measurement – Edge Position
  10. End Measurement – Review Results
  11. End Measurement – Save Data
  12. Data Download and Review

 

 

You might also like these articles

River level monitoring lowers bridge scour risk

Engineers at Transport Scotland have investigated the potential for water level monitoring systems to help mitigate risks where transport infrastructure interacts with moving water. The trial was conducted at a bridge...
HydrologyMeteorology
Weather station Lufft WS600 at solar PV plant.

Building an Effective Meteorological Station for Solar PV

Weather conditions have a huge influence on photovoltaic output. Even intermittent cloud cover can have a dramatic effect on incident solar energy, while other factors like air temperature, wind direction...
MeteorologySolar Energy
DustIQ Soiling Sensor next to PV modules

Soiling Sensor DustIQ: Firmware Update Improves Response and Handling

The pioneering soiling monitoring system Kipp & Zonen DustIQ is becoming even better. From now on, OTT HydroMet provides the DustIQ with a new firmware that simplifies both handling and...
Solar Energy