A Technical Deep-Dive on the OTT SVR 100

The recently updated OTT SVR 100 (Surface Velocity Radar) sensor includes new benefits like stronger compatibility with networks and more trust in data via several data quality indicators. But our latest whitepaper takes a technical deep dive to showcase the technology that the OTT SVR 100 uses to collect measurements as well as verify accuracy […]
How to Change the Oil of OTT Current Meters?

In two video tutorials, we show you how the OTT C31 and C2 current meters are maintained professionally. Why is a regular oil change important for the smooth operation of your current meters? If the current meter isn’t used for a week or longer, we recommend changing the oil shortly before the next use. This […]
TechTip: Firmware 2.0 of the MF pro Flow Meter – Step-by-Step Guide

Read the step-by-step instructions for the latest firmware update 2.0 to learn all about the new features and operation of the MF pro flow meter.
Introducing the updated firmware 2.0 of the OTT MF pro water flow meter

In the following video, we show you, which features and improvements were implemented through the latest MF pro firmware update (version 2.0). Agenda: Introduction Substantive Changes Design Changes QA / QC Enhancements Qreview Watch Video:
Flow Measurement under difficult conditions: Successful Installation of OTT SVR 100

At the Bad Aibling Triftbach water gauge in Rosenheim, Bavaria, the backwater caused by the Mangfall, a tributary of the Inn, during flooding is a major challenge. In such a case, the existing Stage Discharge relationship provides poor data. Sensors that work with the ultrasonic Doppler principle are unsuitable because the river is fed by […]
Tech-Tipp: OTT SLD Instrument and Site Selection
To be at the right place at the right time is a critical success factor. Read the following Tech-Tipp by our flow expert Stefan Siedschlag and learn how to select the best site for you measurement with OTT SLD.