What’s New with LinkComm Software?

LinkComm is a communicator and configuration app, for use with SUTRON dataloggers, which allows you to view measurement data, configure settings, download data logs, and graphs, and perform diagnostics all remotely from your computer or smart device.   Over the past few years, LinkComm software has received numerous updates to support new products, add new […]

TechTip: Set up and connect OTT Pluvio² with OTT netDL

In this TechTip you will learn everything about the connection of the OTT netDL data logger to the Pluvio precipitation sensor product series (Pluvio², Pluvio² L & Pluvio² S) and which configurations are possible.   Summary of the TechTip “OTT netDL and Pluvio”: Installation of the OTT Pluvio² operating software Use of the OTT Pluvio² […]

TechTip: Set Alerts with OTT netDL

In the following TechTip you will learn which alarms the OTT netDL data logger can issue and how to set them. This TechTip requires the experienced use of the OTT data logger operating program as well as the communication with the OTT netDL via USB cable (see also OTT training program). The examples shown in […]

Tech-Tipp: OTT netDL Configuration with several SDI-12 Sensors

All new OTT sensors  provide a bus-capable interface, either SDI-12 or the RS 485 based OTT SDI . The special Master Modul of the OTT netDL enables the connection of several sensors to every bus (SDI-12 or OTT SDI). Connect for example an OTT Pluvio² and a Lufft WS510  sensor to one OTT netDL and […]

Tech-Tipp: Datatransmission between two OTT netDLs via IP

This Tech-Tipp explains how to couple two OTT netDL dataloggers to exchange measured data. This is really helpful in data monitoring or measuring systems with a redundant structure.  Coupling of two OTT netDLs can be realized via a direct connection with a crossed Ethernet cable and also via local networks or via the Internet. Download […]